Description
The ADAU1452/ADAU1451/ADAU1450 are automotive qualified audio processors that far exceed the digital signal processing capabilities of earlier SigmaDSP® devices. The restructured hardware architecture is optimized for efficient audio processing. The audio processing algorithms are realized in sample-by-sample and block-by-block paradigms that can both be executed simultaneously in a signal processing flow created using the graphical programming tool, SigmaStudio™. The restructured digital signal processor (DSP) core architecture enables some types of audio processing algorithms to be executed using significantly fewer instructions than were required on previous SigmaDSP generations, leading to vastly improved code efficiency. The 1.2 V, 32-bit DSP core can run at frequencies of up to 294.912 MHz and execute up to 6144 instructions per sample at the standard sample rate of 48 kHz. However, in addition to industry-standard rates, a wide range of sample rates are available. The integer PLL and flexible clock generator hardware can generate up to 15 audio sample rates simultaneously. These clock generators, along with the on-board asynchronous sample rate converters (ASRCs) and a flexible hardware audio routing matrix, make the ADAU1452/ADAU1451/ADAU1450 ideal audio hubs that greatly simplify the design of complex multirate audio systems. The ADAU1452/ADAU1451/ADAU1450 interface with a wide range of analog-to-digital converters (ADCs), digital-to-analog converters (DACs), digital audio devices, amplifiers, and control circuitry, due to their highly configurable serial ports, S/PDIF interfaces (on the ADAU1452 and ADAU1451), and multipurpose input/output pins. The devices can also directly interface with pulse density modulation (PDM) output microelectromechanical (MEMS) microphones, due to integrated decimation filters specifically designed for that purpose. Independent slave and master I2 C/serial peripheral interface (SPI) control ports allow the ADAU1452/ADAU1451/ADAU1450 not only to be programmed and configured by an external master device, but also to act as mastersthat can program and configure external slave devices directly. This flexibility, combined with self boot functionality, enables the design of standalone systems that do not require any external input to operate.
Specifications: | |
Attribute | Value |
Category | Integrated Circuits (ICs) |
Embedded - DSP (Digital Signal Processors) | |
Mfr | Analog Devices Inc. |
Series | Automotive, SigmaDSP® |
Package | Tape & Reel (TR) |
Cut Tape (CT) | |
Digi-Reel® | |
Part Status | Active |
Type | Sigma |
Interface | I²C, SPI |
Clock Rate | 294.912MHz |
Non-Volatile Memory | ROM (32kB) |
On-Chip RAM | 160kB |
Voltage - I/O | 3.30V |
Voltage - Core | 1.20V |
Operating Temperature | -40°C ~ 105°C (TA) |
Mounting Type | Surface Mount |
Package / Case | 72-VFQFN Exposed Pad, CSP |
Supplier Device Package | 72-LFCSP-VQ (10x10) |
Base Product Number | ADAU1452 |